Juniper-systems Allegro Top Mounting Bracket Manual do Utilizador descarregar pdf (Página 1)

Installing the Top Mount Bracket on the Allegro

The top mount bracket for the Juniper Systems Allegro can be used

in a variety of mounting applications. Originally designed for a GPS

antenna mated with a separate GPS receiver system, it can also be

used with Bluetooth devices like barcode scanners, RFID readers, and

standalone GPS devices.

Installing the top mount bracket on the Allegro is a simple seven-step

process. To complete this, you will need a thin, narrow, metal object.

Caution: Do not use a sharp knife as this could damage the case.

1. Remove the existing on-board stylus from the top of the Allegro.

Figure 1: Remove stylus from Allegro

2. Loosen the thumbscrews on the bracket until the nuts reach the

top of the threads. It is not necessary to remove the nuts.

Figure 2: Loosen thumbscrews.

3. Place the mount in position at the top of the Allegro with the

at face of the mount close to the same plane as the Allegro’s

display. See Figure 3.

1 2 3 4

Installing the Top Mount Bracket on the AllegroThe top mount bracket for the Juniper Systems Allegro can be used in a variety of mounting application

Document P/N: 12856-03 Release date: July 2011 E-mail: [email protected] Web page: www.junipersys.comFigure 3: Align mounting surface as close as

Installing the Top Mount Bracket on the AllegroThe top mount bracket for the Juniper Systems Allegro can be used in a variety of mounting application

Document P/N: 12856-03 Release date: July 2011 E-mail: [email protected] Web page: www.junipersys.comFigure 3: Align mounting surface as close as

Sem comentários

Juniper-systems Allegro Top Mounting Bracket Manual do Utilizador Página 1