Juniper-systems Allegro DOS Manual Manual do Utilizador descarregar pdf (Página 32)

32 Allegro DOS Owner’s Manual

Press ESC or ENTER to save your settings and exit the Battery

Charge Detected screen.

The Battery Charge Detected screen closes and the charge status is set.

Once the battery pack is fully charged, the gauging automatically

sets to 100%.

Setting the Battery Charge Percent

Based on the status of the battery pack, the following

recommendations are designed to help you set the battery charge

percent in the Battery Change Detected screen.

Battery Pack Recommended Setting

Fully charged 100% (default)

Removed and replaced Last

without charging

Uncertain, can Select charge

estimate from 10 to 100%

Uncertain, can’t See suggestions

estimate that follow

If you insert a battery pack and do not have a good idea what the

status of it is, we recommend that you do the following:

Plug the Allegro into the AC wall charger and set the battery

charge to 10% as previously instructed. Fully charge the pack,

this can take up to three to ﬁ ve hours.

Once the battery pack is fully charged, the gauging is

automatically set to 100% and the battery LED indicators

accurately reﬂ ect the battery charge.

Setting the Battery Capacity

The charge capacity ﬁ eld should be set to the charge capacity of the

newly installed battery pack in milliamp-hours (mAh). The charge

capacity of the NiMH batteries we have provided for the Allegro are

as follows:

Gold Peak

™

(GP) VR151 3800 mAh

Empire

™

3500 mAh

Duracell

™

DR9 3000 mAh



1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 165 166

Sem comentários

Juniper-systems Allegro DOS Manual Manual do Utilizador Página 32